2-D Scanner OMD8000-R2100-R2-V1V17
- Measuring method PRT (Pulse Ranging Technology)
- Distance measurement using object
- Two-dimensional measurement with no moving parts
- Measurement using eye-safe LED technology
- 88° scanning angle
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne OMD8000-R2100-R2-V1V17
| Opis produktu |
|---|
| Multi-ray LED scanner for measuring the distance to an object, measuring method: PRT, measuring range: up to 8 m on white, 2x M12 plugs |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2 ... 2 m (bw 6%) 0.2 … 8 m (wh 90 %) |
|
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Scan rate | 20 s-1 (1 scan = 11 measurements) | |
| Scanning angle | 88° | |
| Diameter of the light spot | 550 mm at 4 m (central beam) | |
| Resolution | 1 mm | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 120 mA / 24 V DC | |
| Protection class | III (operating voltage 50 V) | |
| Time delay before availability | < 3 s | |
| Interface 1 | ||
| Interface type | RS 232 | |
| Protocol | P+F R2100 115k, 8N1 | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007 | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Measurement accuracy | ||
| Measured value noise | 20 mm (1 sigma, 4 m on white, central beam) | |
| Angle resolution | 8 ° | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP42 | |
| Connection | 5-pin, M12x1 connector, standard (supply) 8-pin, M12x1 connector, standard |
|
| Material | ||
| Housing | plastic | |
| Optical face | PMMA | |
| Mass | approx. 270 g | |
| Dimensions | ||
| Height | 39 mm | |
| Width | 80 mm | |
| Length | 136 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: OMD8000-R2100-R2-V1V17
Function
The new 2-dimensional multi-ray LED scanner uses tried-and-tested Pulse Ranging Technology and boasts a wide range of user-friendly features. The eye-safe LED technology in the sensor allows it to be used by personnel in all working areas without posing a danger. The 11 emitter elements arranged side by side span a scanning range of 88 degrees, while the emitter LEDs set themselves apart through their large light spot. Measuring on a surface rather than on a point makes it easier to measure inhomogeneous surfaces. A further highlight is the absence of any moving parts such as a motor or bearings, which makes the device less complex in its design and more resistant to mechanical stress.
Informative Literature: OMD8000-R2100-R2-V1V17
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Application Report - R2000 2-D-LiDAR Sensors for Navigating Automated Guided Vehicles | ENG | 337 KB | |
| Product Overview - LiDAR Sensors | ENG | 2253 KB |
Product Documentation: OMD8000-R2100-R2-V1V17
| Product information | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Technical information: serial Protocol / Technische Information: serielles Protokoll | ALL | 98 KB | |
| Brief Instructions | |||
| Instruction leaflet / Beipackzettel | ALL | 425 KB | |
Design / Simulation: OMD8000-R2100-R2-V1V17
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1779 KB |
Approvals: OMD8000-R2100-R2-V1V17
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-CA-L87056-31-02205102-0 / UL-US-L87056-11-02205102-0 | ALL | 487 KB |
Produkty powiązane: OMD8000-R2100-R2-V1V17
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.